Customize Parameters [07/2022 - ]
- CUSTOMIZE LTA NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Customizing with the Multi-information Display
- Turn the ignition switch to ON.
- Enter the following menus: Settings Tab / Settings / LTA Setup
- Select the setting by referring to the table below.
- Using the steering pad switches, change the customize settings.LTA
Display Description Setting Default Lane Center Lane centering function setting On/Off On Alert Method of lane departure alert Steering vibrator/Buzzer/Off Steering vibrator Sensitivity Lane departure alert timing High/Standard High Sway Warning Vehicle sway warning function setting On/Off On Sway Sensitivity Sway warning sensitivity setting High/Standard/Low Standard HINT:
Some LTA functions are operable only when other functions are enabled or operating. Refer to the following table.
Dynamic Radar Cruise Control System LTA Main Switch Steering Assist Lane Center Sway Warning Lane Departure Alert Function - ◦ - - - Steering Assist Function - ◦ ◦ - - Lane Centering Function • ◦ ◦ ◦ - Vehicle Sway Warning Function - - - - ◦ •: System/function operating
◦: Turned/Set to On