Utility [09/2022 - ]
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2024 Lexus ES 300h, 2024 Lexus ES 250, 2023 Lexus ES 350, and 2023 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- ALL READINESS
HINT:
- With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.
- You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.
- Clear the DTCs even if no DTCs are stored.
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
- Turn the ignition switch off and wait for 2 minutes or more.
- Turn the ignition switch to ON.
- Perform the DTC judgment driving pattern to run the DTC judgment.
Chassis > Circumference Monitoring Camera Control Module > Utility
Tester Display All Readiness - Input the DTCs to be confirmed.
- Check the DTC judgment result.
HINT:
GTS Display Description Normal - DTC judgment completed
- System normal
Abnormal - DTC judgment completed
- System abnormal
Incomplete - DTC judgment not completed
- Perform the driving pattern
If the judgment result shows Incomplete, perform the DTC confirmation driving pattern again.
- CLEAR IMAGE INFORMATION
HINT:
This utility is used to clear the image information stored in the parking assist ECU.
- IMAGE RECORDING SETTING
HINT:
This utility is used to enable/disable image recording.