How To Proceed With Troubleshooting [08/2019 - ]: Procedure

Result

Result: 

NEXT 

See step  2

Standard voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result: 

NEXT 

See step  3

1. Using the Techstream, inspect the CAN communication function to make sure that there are no malfunctions in the communication system.

   Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2019 - ]

   Result

   Result	Proceed to
   No DTCs output	A
   DTCs output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ] 

Result: 

A 

See step  4

1. Using the Techstream, inspect the LIN communication function to make sure that there are no malfunctions in the communication system.

   Result

   Result	Proceed to
   No DTCs output	A
   DTCs output	B

Result: 

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2019 - 08/2022]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2022 - ]  

Result: 

A 

See step  5

1. Refer to the Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [08/2015 - 08/2021] , or refer to PROBLEM SYMPTOMS TABLE [08/2021 - ] 

   Result

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

Result: 

B 

See step  7

Result: 

A 

See step  6

1. Data List / Active Test.

   Refer to DATA LIST / ACTIVE TEST [08/2019 - ] 

2. Terminals of ECU.

   Refer to TERMINALS OF ECU [08/2019 - 08/2021] , or refer to TERMINALS OF ECU [08/2021 - 08/2022] , or refer to TERMINALS OF ECU [08/2022 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

END