Jam Protection Function does not Operate [08/2015 - ]: Procedure

1. Initialize the power window regulator motor (Refer to INITIALIZATION [08/2015 - ] ).
2. Check if the power window auto up/down function operates (Refer to OPERATION CHECK [08/2015 - 08/2016] , or refer to OPERATION CHECK [08/2016 - ] ).

   OK

   Auto up/down function operates.

Result: 

NG 

END (PROBLEM DUE TO INITIALIZATION FAILURE) 

Result: 

OK 

See step  2

1. Check if the jam protection function operates for applicable power window.

   HINT: 

   The jam protection function does not operate between the fully closed position of the door glass and the position 4 mm (0.157 in.) below that.

   OK

   Jam protection function operates.

   RESULT
   
   

   Result	Proceed to
   OK	A
   NG (Front power window LH)	B
   NG (Front power window RH)	C
   NG (Rear power window LH)	D
   NG (Rear power window RH)	E

Result: 

A 

END 

Result: 

B 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

(Refer to REMOVAL [08/2015 - ] )

Result: 

C 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

(Refer to REMOVAL [08/2015 - ] )

Result: 

D 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

(Refer to REMOVAL [08/2015 - ] )

Result: 

E 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

(Refer to REMOVAL [08/2015 - ] )