Inspection [08/2015 - 08/2021]: Procedure
- INSPECT HEIGHT CONTROL OFF SWITCH
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Switch Condition Specified Condition 16 (N) - 9 (E) Height control OFF switch pressed Below 1 Ω Height control OFF switch not pressed 10 kΩ or higher TEXT IN ILLUSTRATION*a Component without harness connected
(Height Control OFF Switch)If the result is not as specified, replace the height control OFF switch.
- Measure the resistance according to the value(s) in the table below.