Installation [07/2020 - ]: Procedure
- INSTALL TRANSMISSION REVOLUTION SENSOR (NT)
- Install the transmission revolution sensor (NT) to the automatic transmission case with the bolt.
Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf)
- Connect the transmission revolution sensor (NT) connector.
- Install the transmission revolution sensor (NT) to the automatic transmission case with the bolt.
- INSTALL TRANSMISSION VALVE BODY ASSEMBLY
See step 2
- INSTALL TRANSMISSION REVOLUTION SENSOR (SP2)
- Install the transmission revolution sensor (SP2) to the automatic transmission case with the bolt.
Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf)
- Connect the transmission revolution sensor (SP2) connector.
- Install the transmission revolution sensor (SP2) to the automatic transmission case with the bolt.
- INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
Refer to INSTALLATION [07/2020 - ]