Remote Up / Down Function does not Operate [01/2017 - ]: Procedure
- READ VALUE USING TECHSTREAM (MAIN BODY)
- Read the Data List according to the display on the Techstream.
Refer to DATA LIST / ACTIVE TEST [01/2017 - ]
Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Communication P-Door Motor Connection status between power window regulator motor assembly RH and main body ECU (multiplex network body ECU) STOP or OK STOP: Communication stopped
OK: Normal communication- Communication Master SW Connection status between multiplex network master switch assembly and main body ECU (multiplex network body ECU) STOP or OK STOP: Communication stopped
OK: Normal communication- Body Electrical > Main Body > Data List
Tester Display Communication P-Door Motor Communication Master SW OK
On the Techstream screen, OK is displayed.
Result
Proceed to OK NG
Result:
NG
GO TO LIN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [01/2017 - ]
Result:
OK
See step 2
- Read the Data List according to the display on the Techstream.
- READ VALUE USING TECHSTREAM (MASTER SWITCH)
- Read the Data List according to the display on the Techstream.
Refer to DATA LIST / ACTIVE TEST [01/2017 - ]
Body Electrical > Master Switch > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note P Door P/W Auto SW Front passenger door power window auto up and down switch signal OFF or ON OFF: Front passenger door power window auto switch not being operated
ON: Front passenger door power window auto switch being operated- P Door P/W Up SW Front passenger door power window manual up switch signal OFF or ON OFF: Front passenger door power window manual up switch not being operated
ON: Front passenger door power window manual up switch being operated- P Door P/W Down SW Front passenger door power window manual down switch signal OFF or ON OFF: Front passenger door power window manual down switch not being operated
ON: Front passenger door power window manual down switch being operated- Window Lock Switch Status Window lock switch signal OFF or ON OFF: Window lock switch UNLOCK position
ON: Window lock switch LOCK position- Body Electrical > Master Switch > Data List
Tester Display P Door P/W Auto SW P Door P/W Up SW P Door P/W Down SW Window Lock Switch Status OK
On the Techstream screen, ON or OFF is displayed accordingly.
Result
Proceed to OK NG
Result:
OK
REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY RH. Refer to REMOVAL [01/2017 - 05/2023] , or refer to REMOVAL [05/2023 - ]
Result:
NG
REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY. Refer to REMOVAL [01/2017 - ]
- Read the Data List according to the display on the Techstream.