How To Proceed With Troubleshooting [10/2023 - ]: Procedure

Result

Result: 

NEXT 

See step  2

1. Confirm that inspection of cause of malfunction not related to vehicle settings or vehicle components has been completed.
   NOTE:

   With regards to the main cause of malfunctions not related to vehicle settings or vehicle components, refer to Precautions for Inspection or Registration before performing an inspection.

   Refer to PRECAUTION [10/2023 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

HINT: 

• In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
• Gather as much information as possible for reference. Past malfunctions that seem unrelated may also help in some cases.
• The following 5 items are important points for problem analysis:

  What	Vehicle model, system name
  When	Date and time, frequency, whether the problem occurred recently or has been occurring for a long time
  Where	Whether the problem occurs at specified location
  Under what conditions?	Whether the doors were locked or unlocked, whether the engine switch was on (IG), whether the engine was running
  How did it happen?	Ask the customer for details about the vehicle operating conditions, environment and malfunction.

Result

Result: 

NEXT 

See step  4

1. Read and save vehicle control history (RoB) using the GTS.

   Body Electrical > Smart Access > Utility 

   Tester Display
   Vehicle Control History (RoB)

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  5

1. Measure the battery voltage.

   Standard Voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

2. Check the fuses and relays.
3. Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  6

1. Using the GTS, check for CAN communication system DTCs.

   Refer to DIAGNOSIS SYSTEM [10/2023 - ]

   Result

   Result	Proceed to
   CAN DTCs are not output	A
   CAN DTCs are output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2023 - ] 

Result: 

A 

See step  7

1. Using the GTS, check for LIN communication system DTCs.

   Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2023 - ]

   Result

   Result	Proceed to
   LIN DTCs are not output	A
   LIN DTCs are output	B

Result: 

B 

GO TO LIN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2023 - ]  

Result: 

A 

See step  8

1. Check that the digital key system and entry and start system is set to on.

   for Digital Key System: Refer to CUSTOMIZE PARAMETERS [10/2023 - ] 

   for Smart Access System with Push-button Start (for Entry Function): Refer to CUSTOMIZE PARAMETERS [10/2023 - ]

   for Smart Access System with Push-button Start (for Start Function): Refer to CUSTOMIZE PARAMETERS [10/2023 - ]

   HINT: 

   • If the digital key system is set to off, all functions of the digital key system will not function.
   • If the smart access system with push-button start is set to off, some functions of the digital key system will not function.

   Result

   Result	Proceed to
   Digital key system and entry and start system are enabled	A
   Digital key system is disabled	B
   Smart access system with push-button start is disabled	C

Result: 

B 

GO TO CUSTOMIZE PARAMETERS. Refer to  CUSTOMIZE PARAMETERS [10/2023 - ]  

Result: 

C 

GO TO CUSTOMIZE PARAMETERS. Refer to  CUSTOMIZE PARAMETERS [10/2023 - ] 

Result: 

A 

See step  9

1. Check for DTCs.

   Body Electrical > Smart Access > Trouble Codes 

   Result

   Result	Proceed to
   No DTCs are output	A
   Smart access system with push-button start or digital key system DTCs are output	B
   DTCs other than smart access system with push-button start and digital key system DTCs are output	C

Result: 

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART 

for Smart Access System with Push-button Start (for Entry Function): Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2023 - ]

for Smart Access System with Push-button Start (for Start Function): Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2023 - ]

Result: 

C 

GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer To  DIAGNOSTIC TROUBLE CODE CHART [10/2023 - ]  

Result: 

A 

See step  10

1. Refer to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [10/2023 - ] 

   Result

   Result	Proceed to
   Fault is not listed in Problem Symptoms Table (Fault can be simulated)	A
   Fault is not listed in Problem Symptoms Table (Fault cannot be simulated)	B
   Fault is listed in Problem Symptoms Table	C

Result: 

B 

CHECK FOR INTERMITTENT PROBLEMS. Refer to  VEHICLE CONTROL HISTORY (RoB) [10/2023 - ] 

Result: 

C 

See step  12

Result: 

A 

See step  11

1. Terminals of ECU

   Refer to TERMINALS OF ECU [10/2023 - ] 

2. Data List / Active Test

   Refer to DATA LIST / ACTIVE TEST [10/2023 - ] 

3. Operation Check

   Refer to OPERATION CHECK [10/2023 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  12

Result

Result: 

NEXT 

See step  13

Result

Result: 

NEXT 

END