LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> NX 300h Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Active Sound Control (ASC) System - Diagnostics - Introduction >> ASC System >> Freeze Frame Data [09/2017 - ] >> Freeze Frame Data [09/2017 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Freeze Frame Data [09/2017 - ]

  1. FREEZE FRAME DATA 
    1. Whenever an ASC system DTC is stored, the stereo component equalizer assembly stores the current vehicle state as freeze frame data.
  2. CHECK FREEZE FRAME DATA 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / ASC / Trouble Codes.

      Body Electrical > ASC > Trouble Codes 

    5. According to the Techstream display, select a DTC that stored freeze frame data.
    6. Read the freeze frame data recorded when the DTC was stored.

      Body Electrical > ASC 

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Sound State Simulated engine sound output status Stopping or Sounding Stopping: Simulated engine sound stopped
      Sounding: Simulated engine sound being output      		 -
      Mute Mute setting OFF or ON OFF: Mute off
      ON: Mute on      		 -
      Gear Position (D Range) Gear position information 1st, 2nd, 3rd, 4th, 5th or 6th Actual gear position -
      Suppositional Engine Speed (Target Value) Calculated engine speed in the stereo component equalizer assembly Min.: 0 rpm
      Max.: 8000 rpm      		 Changes according to driving conditions (accelerator pedal opening angle, vehicle speed, etc.) -
      Volume SW Vehicle sound switch on/off status OFF or ON OFF: Vehicle sound switch off
      ON: Vehicle sound switch on      		 -
      Speaker Disconnection Inspection State of wire harness between stereo component equalizer assembly and No. 1 speaker assembly with box OFF or Inspecting OFF: Open not detected
      Inspecting: Open detected      		 -
      Volume Switch Voltage The VSLI terminal voltage to the CPU of the stereo compartment equalizer assembly Min.: 0 V
      Max.: 5 V      		 Changes according to vehicle sound switch volume setting -
      Pseudo Engine Revolution (HV ECU) Actual engine speed Min.: 0 rpm
      Max.: 12800 rpm      		 Actual engine speed -
      Vehicle Speed Maximum wheel speed sensor reading Min.: 0 km/h
      Max.: 327.67 km/h      		 Actual vehicle speed -
      Accelerator Position Accelerator pedal opening angle Min.: 0%
      Max.: 111.0%      		 Actual accelerator pedal opening angle -
      Shift SW Status (P Range) Park/Neutral position switch status OFF or ON OFF: Shift lever in any position other than P
      ON: Shift lever in P      		 -
      Shift SW Status (R Range) Shift lever position (R) OFF or ON OFF: Shift lever in any position other than R
      ON: Shift lever in R      		 -
      Shift SW Status (D Range) Shift lever position (D) OFF or ON OFF: Shift lever in any position other than D
      ON: Shift lever in D      		 -
      Shift SW Status (N Range) Shift lever position (N) OFF or ON OFF: Shift lever in any position other than N
      ON: Shift lever in N      		 -
      Gear Position (Sports Mode) Gear position information with shift lever in S Not Sports Mode, 1st, 2nd, 3rd, 4th, 5th or 6th Not Sports Mode: Shift lever in any position other than S
      1st: S1 gear range selected
      2nd: S2 gear range selected
      3rd: S3 gear range selected
      4th: S4 gear range selected
      5th: S5 gear range selected
      6th: S6 gear range selected      		 -
      Drive Mode Status Drive mode status Normal, Power, Sport, Sport, Sport+, Comfort, ECO, Customize Actual drive mode displayed -
      Integrated Sport Mode Indicator Drive mode (SPORT) status OFF or Lighting OFF: Drive mode other than SPORT mode selected
      Lighting: SPORT mode selected      		 -
      Sport Mode Indicator S position switch status OFF or Lighting OFF: Shift lever in any position other than S
      Lighting: Shift lever in S      		 -
      ECO Mode Indicator ECO mode indicator illumination status OFF or Lighting OFF: ECO mode indicator not illuminated
      Lighting: ECO mode indicator illuminates      		 -
      Powertrain Customize Status Powertrain customize status NONE, POWER, ECO, NORMAL Actual powertrain displayed -
      Mode Indicator Signal Drive mode indicator illumination status OFF, S Mode, M Mode, D Mode Actual mode indicator status displayed -
      Engine Mode Engine operating status Stopped, Move to Stopping, Starting or Running Stopped: Engine stopped
      Move to Stopping: Engine attempting to stop
      Starting: Engine attempting to start
      Running: Engine running      		 -
      EV Mode EV mode indicator illumination status OFF or Lighting OFF: EV mode indicator not illuminated
      Lighting: EV mode indicator illuminates      		 -
      Integrated Sport Mode Status Drive mode (SPORT, SPORT S or SPORT S+) status Not Sport, PWR & Chassis, Chassis or PWR Not Sport: Drive mode other than SPORT, SPORT S or SPORT S+ mode selected
      PWR & Chassis: SPORT S+ mode selected
      Chassis: SPORT S mode selected
      PWR: SPORT S mode selected      		 -
      Number of DTC Number of trouble codes Min.: 0
      Max.: 255      		 Number of DTCs displayed -
  3. CLEAR FREEZE FRAME DATA 
    NOTE:

    Clearing the DTCs will also clear the freeze frame data.

    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Clear DTCs and freeze frame data.

      Refer to DTC CHECK / CLEAR [10/2014 - ] 

      Body Electrical > ASC > Clear DTCs 

scientia non olet · About LEMON Manuals