Jam Protection Function does not Operate [10/2014 - ]: Procedure

1. Initialize the power window regulator motor assembly (applicable location).

   Refer to INITIALIZATION [10/2014 - ]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Check if the power window auto up and down function operates normally.

   Refer to OPERATION CHECK [10/2014 - ]

   OK

   Auto up and down function is normal.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO OTHER PROBLEM. Refer to  PROBLEM SYMPTOMS TABLE [10/2014 - ] 

Result: 

OK 

See step  3

1. Check if the jam protection function operates normally for the applicable power window.

   HINT: 

   The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.

   OK

   Jam protection function operates normally.

   Result

   Result	Proceed to
   OK	A
   NG (Driver door power window)	B
   NG (Front passenger door power window)	C
   NG (Rear LH door power window)	D
   NG (Rear RH door power window)	E

Result: 

A 

END (PROBLEM DUE TO INITIALIZATION FAILURE) 

Result: 

B 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH. Refer to  REMOVAL [10/2014 - 05/2019]  , or refer to  REMOVAL [05/2019 - ] 

Result: 

C 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH. Refer to  REMOVAL [10/2014 - 05/2019]  , or refer to  REMOVAL [05/2019 - ] 

Result: 

D 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH. Refer to  REMOVAL [10/2014 - 05/2019]  , or refer to  REMOVAL [05/2019 - ] 

Result: 

E 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH. Refer to  REMOVAL [10/2014 - 05/2019]  , or refer to  REMOVAL [05/2019 - ]