LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> NX 300h Base >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Smart Access System With Push-Button Start (For Start Function) - Diagnostic Codes & Symptom Tests >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function) >> DTC B2271: Ignition Hold Monitor Malfunction [10/2014 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B2271: Ignition Hold Monitor Malfunction [10/2014 - ]: Description

This DTC is stored when a malfunction in the IG circuit and IG hold circuit in the certification ECU (smart key ECU assembly) is detected.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
B2271 Ignition Hold Monitor Malfunction When either of the following conditions is met (1-trip detection logic*1):
  • The IG circuit in the certification ECU (smart key ECU assembly) is malfunctioning.*2
  • The IG hold circuit in the certification ECU (smart key ECU assembly) is malfunctioning.*3
  • AM2 fuse
  • Certification ECU (smart key ECU assembly)
  • Harness or connector
 DTC Output Confirmation Operation: 
  1. Turn the power switch on (IG).
  1. *1: Only detected while a malfunction is present and the power switch is on (IG).
  2. *2: The IG circuits activate the IG relay.
  3. *3: After the IG circuit turns on, even if the certification ECU (smart key ECU assembly) malfunctions, the IG hold circuit maintains the power source mode in on (IG).
VEHICLE CONDITION AND FAIL-SAFE FUNCTION WHEN MALFUNCTION DETECTED

Vehicle Condition when Malfunction Detected Fail-safe Function when Malfunction Detected
The power switch cannot be turned on (IG) (the hybrid control system cannot be started). The power source mode cannot be changed to on (IG).
RELATED DATA LIST AND ACTIVE TEST ITEMS

DTC No. Data List and Active Test
B2271 Power Source Control 
  • IG Relay Monitor (Inside)
  • Latch Circuit
scientia non olet · About LEMON Manuals