Power Source Mode does not Change to ON (IG and ACC) [10/2014 - ]: Description

If any of the following operations are performed, the certification ECU (smart key ECU assembly) receives a signal, and changes the power source mode.

• With the electrical key transmitter sub-assembly in the cabin, the power switch is pressed.
• When the transmitter battery of the electrical key transmitter sub-assembly is depleted, the brake pedal is depressed with the electrical key transmitter sub-assembly held near the power switch.
• When the smart access system with push-button start (for Start Function) has been canceled, the brake pedal is depressed with the electrical key transmitter sub-assembly held near the power switch.