LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> NX 300h Base >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Smart Access System With Push-Button Start (For Start Function) - Diagnostic Codes & Symptom Tests >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function) >> Power Source Mode does not Change to ON (IG) [10/2014 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Source Mode does not Change to ON (IG) [10/2014 - ]: Description

If the power switch is pressed with the electrical key transmitter sub-assembly in the cabin, the certification ECU (smart key ECU assembly) receives a signal and changes the power source mode.

RELATED DATA LIST AND ACTIVE TEST ITEMS

Problem Symptom Data List and Active Test
Power source mode does not change to on (IG) but does change to on (ACC) Power Source Control 
  • Power Supply Condition
  • IG Relay Monitor (Inside)
  • IG Relay Monitor (Outside)
  • IG Circuit
scientia non olet · About LEMON Manuals