Removal [09/2014 - 11/2017]: Procedure
WARNING: This page is about a different car, the 2017 Lexus RC 350, 2017 Lexus RC 300, 2016 Lexus RC 350, 2016 Lexus RC 300, and 2015 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE V-BANK COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 4 [09/2014 - 10/2015]
, or refer to PROCEDURE - Step 4 [10/2015 - 11/2017]
- REMOVE VVT SENSOR (for Intake Side of Bank 1)
- Disconnect the VVT sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.
NOTE:
If the VVT sensor has been struck or dropped, replace it.
- REMOVE VVT SENSOR (for Exhaust Side of Bank 1)
- Disconnect the VVT sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.
NOTE:
If the VVT sensor has been struck or dropped, replace it.
- REMOVE VVT SENSOR (for Intake Side of Bank 2)
- Disconnect the VVT sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.
NOTE:
If the VVT sensor has been struck or dropped, replace it.
- REMOVE VVT SENSOR (for Exhaust Side of Bank 2)
- Disconnect the VVT sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.
NOTE:
If the VVT sensor has been struck or dropped, replace it.