LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> RC 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Control System (8AR-FTS) - Service Information) >> Manifold Absolute Pressure Sensor >> Installation [10/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [10/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus RC 300, 2023 Lexus RC 300, 2022 Lexus RC 300, 2021 Lexus RC 300, and 2020 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 2 TURBO PRESSURE SENSOR 
    1. Connect the vacuum hose to the No. 2 turbo pressure sensor and slide the hose clamp to secure it.
    2. Install the No. 2 turbo pressure sensor to the intake manifold with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      NOTE:

      If the No. 2 turbo pressure sensor has been struck or dropped, replace it.

    3. Connect the vacuum hose to intake manifold and slide the hose clamp to secure it.
    4. Engage the clamp.
    5. Connect the No. 2 turbo pressure sensor connector.
  2. INSTALL NO. 1 TURBO PRESSURE SENSOR 
    1. Install the No. 1 turbo pressure sensor to the intake manifold with the bolt.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) 

      NOTE:

      If the No. 1 turbo pressure sensor has been struck or dropped, replace it.

    2. Connect the No. 1 turbo pressure sensor connector.
scientia non olet · About LEMON Manuals