DTC Check / Clear [09/2020 - ]
- CHECK DTC (Using Techstream)
- Turn the engine switch off.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Chassis / DRS / Trouble Codes.
Chassis > DRS > Trouble Codes
- Read the DTCs by following the display on the Techstream.
- CLEAR DTC (Using Techstream)
- Turn the engine switch off.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Chassis / DRS / Trouble Codes.
Chassis > DRS > Clear DTCs
- Clear the DTCs by following the display on the Techstream.