Cruise Main Indicator Light Circuit [09/2014 - 11/2017]: Description

When the dynamic radar cruise control system is turned on using the cruise control switch (ON-OFF button), the cruise control indicator (vehicle-to-vehicle distance control mode) illuminates. The driving support ECU assembly uses this and other indicators to indicate the control condition (presence or absence of a preceding vehicle, vehicle-to-vehicle distance, and set speed) and fail-safe state via CAN communication.

HINT: 

If the vehicle in front in the same lane significantly decreases vehicle speed or another vehicle moves in front of this vehicle, adequate deceleration cannot be applied by the cruise control system and the vehicle-to-vehicle distance will become shorter. At this time, the system sounds the buzzer to warn the driver. The indicators for the dynamic radar cruise control system use CAN for communication. Therefore, if there are any indicator malfunctions, check for DTCs in the CAN communication system before troubleshooting this circuit.