DTC C1419: Deceleration Sensor Internal Circuit; DTC C1435: Yaw Rate Sensor Internal Circuit [11/2017 - 03/2019]: Procedure

1. Replace the yaw rate and acceleration sensor.

   Refer to REMOVAL [09/2014 - ]

   NOTE:

   Check the yaw rate and acceleration sensor signal after replacement.

   Refer to TEST MODE PROCEDURE [11/2017 - 03/2019]

   HINT: 

   If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step before replacing parts.

   Refer to PROBLEM SYMPTOMS TABLE [11/2017 - 03/2019]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

END