Fail-Safe Chart [09/2014 - 11/2017]
- MALFUNCTION DETECTION
- Operation when malfunction is detected
Content Operation When thermistor malfunction is detected Heater off When overheating (175°C (347°F)) of controller is detected Heater off When load short current (50 A or more) is detected Heater off When undervoltage (4.5 V) is detected Heater off OFF timer (30 min.) After preset time of timer passes, heater off Reverse voltage protection Protection circuit operates - Malfunction detection conditions
- When an open or short in the steering wheel heater unit thermistor continues for 2 seconds or more.
- When the steering heater switch (refreshing seat switch) is pressed continuously for 10 seconds or more.
- Operation when malfunction is detected