Removal [08/2019 - ]: Procedure

Refer to REMOVAL [08/2019 - ]

1. Remove the 8 nuts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Using a plastic hammer, remove the transfer assembly from the automatic transaxle assembly.
   NOTE:

   • Remove the transfer assembly from the automatic transaxle assembly without tilting it.
   • During removal, do not hold the transfer assembly by the oil seals on either side of the transfer assembly.
3. Remove the 4 transfer and transaxle setting stud bolts from the automatic transaxle assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   HINT: 

   Perform this procedure only when replacement of the transfer and transaxle setting stud bolt is necessary.