LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> RX 450h Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Lane Control System - Diagnostics (Introduction) >> Lane Control System >> DTC Check / Clear [08/2019 - ] >> DTC Check / Clear [08/2019 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [08/2019 - ]

  1. CHECK FOR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / Lane Control / Trouble Codes.

      Chassis > Lane Control > Trouble Codes 

    5. Check for DTCs (Test Failed / Pending / Confirmed).

      HINT: 

      Techstream Display Description
      Test Failed Represent malfunctions that were detected during the current trip.
      Pending Represent malfunctions which have occurred since the DTCs were last cleared but have not been confirmed.
      Confirmed Represent malfunctions which have occurred since the DTCs were last cleared and have been confirmed. (The number of trips since the DTC was stored may differ for each DTC.)

      Freeze frame data is stored respectively for pending DTCs, confirmed DTCs and the latest DTCs.

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / Lane Control / Clear DTCs.

      Chassis > Lane Control > Clear DTCs 

    5. Clear the DTCs.

      HINT: 

      Clearing the DTCs will also clear the freeze frame data.

scientia non olet · About LEMON Manuals