Freeze Frame Data [10/2018 - ]
- DESCRIPTION
- Whenever a road sign assist system DTC is stored, the forward recognition camera stores the current vehicle state (ECU and sensor information) as Freeze Frame Data.
- CHECK FREEZE FRAME DATA
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Road Sign Assist / Trouble Codes.
Body Electrical > Road Sign Assist > Trouble Codes
- According to the Techstream display, select a DTC that stored freeze frame data.
- Read the freeze frame data recorded when the DTC was stored.
Body Electrical > Road Sign Assist
Tester Display Measurement Item Range Normal Condition Diagnostic Note Total Distance Traveled - - - Cannot be used Total Distance Traveled - Unit - - - Cannot be used Traffic Sign Estimated Speed Unit - - - Cannot be used Traffic Sign Estimated Traffic Division - - - Cannot be used RSA Navigation Fusion Control RSA navigation fusion control setting OFF or ON OFF: RSA navigation fusion control off
ON: RSA navigation fusion control on-