Customize Parameters [07/2020 - 05/2023]

CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.

Customizing with the Techstream

Select the setting by referring to the table below.

Seat

Tester Display	Description	Default	Setting	ECU
D Seat Operation Interference Avoidance Function	Setting of the function to reverse operation when jam detection is detected during slide direction driver seat	ON	0:ON, 1:OFF	Position control ECU assembly LH
P Seat Operation Interference Avoidance Function	Setting of the function to reverse operation when jam detection is detected during slide direction front passenger seat	ON	0:ON, 1:OFF	Position control ECU assembly RH
Seat Move Distance	Setting of seat slide distance for power seat power easy access system	Standard	00:OFF, 01:Little, 10:Standard	Main body ECU (Multiplex network body ECU)

Select the setting by referring to the table below.

Smart Key / Access

Tester Display	Description	Default	Setting	ECU
Seat position/Tilt & Telesco memory recall setting	This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart access system with push-button start" or "Any door unlock and open with smart access system with push-button start".	D Door	0:D Door, 1:Any Door	Main body ECU (Multiplex network body ECU)

Customizing with the multi-display

Turn the engine switch on (IG).
Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Other vehicle settings.

Select the setting by referring to the table below.

Display	Description	Default	Setting	Relevant ECU
Driver's seat easy-exit slide	Allows customizing of the seat movement distance for the power seat power easy access system.	Full	Off / Partial / Full	Main body ECU (Multiplex network body ECU)