Front Passenger Side Door-linked Window Control does not Operate [01/2017 - ]: Procedure
- READ VALUE USING TECHSTREAM (MAIN BODY)
- Read the Data List according to the display on the Techstream.
Refer to DATA LIST / ACTIVE TEST [01/2017 - ]
Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note FR Door Courtesy SW Courtesy light switch RH signal OFF or ON OFF: Front door RH closed
ON: Front door RH open- Body Electrical > Main Body > Data List
Tester Display FR Door Courtesy SW OK
On the Techstream screen, OFF or ON is displayed accordingly.
Result
Proceed to OK NG
Result:
NG
GO TO LIGHTING SYSTEM (Door Courtesy Switch Circuit). Refer to Door Courtesy Switch Circuit [01/2017 - ]
Result:
OK
See step 2
- Read the Data List according to the display on the Techstream.
- READ VALUE USING TECHSTREAM (MAIN BODY)
- Read the Data List according to the display on the Techstream.
Refer to DATA LIST / ACTIVE TEST [01/2017 - ]
Body Electrical > Main Body > Data List
Tester Display Measurement Item Normal Condition Reference Value Diagnostic Note Communication P-Door Motor Connection status between power window regulator motor assembly RH and main body ECU (multiplex network body ECU) STOP or OK STOP: Communication stopped
OK: Normal communication- Body Electrical > Main Body > Data List
Tester Display Communication P-Door Motor OK
On the Techstream screen, OK is displayed.
Result
Proceed to OK NG
Result:
NG
GO TO LIN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [01/2017 - ]
Result:
OK
See step 3
- Read the Data List according to the display on the Techstream.
- PERFORM INITIALIZATION
- Initialize the power window regulator motor assembly RH.
Refer to INITIALIZATION [01/2017 - ]
- Check the power window control system.
Refer to OPERATION CHECK [01/2017 - ]
OK
Front passenger side door power window operates normally.
Result
Proceed to OK NG
Result:
OK
END (Initialization not performed)
Result:
NG
REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY RH. Refer to REMOVAL [01/2017 - 05/2023] , or refer to REMOVAL [05/2023 - ]
- Initialize the power window regulator motor assembly RH.