DTC P0505-00: Idle Control System [12/2021 - ]: Procedure
- CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0505-00)
- Read the DTCs.
Powertrain > Engine > Trouble Codes
Result
Result Proceed to P0505-00 and other DTCs are output A DTC P0505-00 is output B HINT:
If any DTCs other than P0505-00 are output, troubleshoot those DTCs first.
Result:
A
GO TO DTC CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2021 - 10/2023] , or Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2023 - ]
Result:
B
See step 2
- Read the DTCs.
- CHECK PCV VALVE AND HOSE CONNECTIONS
- Check the PCV hose connections.
- Check the PCV valve.
Refer to ON-VEHICLE INSPECTION [12/2021 - ]
OK
PCV hose and PCV valve are connected correctly and are not damaged.
Result
Proceed to OK NG
Result:
NG
REPAIR OR REPLACE PCV VALVE OR HOSE
Result:
OK
See step 3
- CHECK INTAKE SYSTEM
- Check the intake system for vacuum leaks.
Refer to ON-VEHICLE INSPECTION [12/2021 - ]
OK
No leaks from the intake system.
HINT:
Perform "Inspection After Repair" after repairing or replacing the intake system.
Refer to INITIALIZATION [12/2021 - ]
Result
Proceed to OK NG
Result:
NG
REPAIR OR REPLACE INTAKE SYSTEM
Result:
OK
See step 4
- Check the intake system for vacuum leaks.
- INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY (THROTTLE VALVE)
- Check the throttle body with motor assembly condition.
OK
Throttle valve is not contaminated with foreign matter and moves smoothly.
HINT:
Perform "Inspection After Repair" after replacing the throttle body with motor assembly.
Refer to INITIALIZATION [12/2021 - ]
Result
Proceed to OK NG
Result:
NG
REPLACE THROTTLE BODY WITH MOTOR ASSEMBLY (THROTTLE WITH THROTTLE POSITION SENSOR BODY ASSEMBLY). Refer to REMOVAL [12/2021 - ]
Result:
OK
See step 5
- Check the throttle body with motor assembly condition.
- CLEAR DTC
Pre-procedure1
- None
Post-procedure1
- Turn the ignition switch off and wait for at least 30 seconds.
Result:
NEXT
See step 6
- CONFIRM WHETHER DTC OUTPUT RECURS (DTC P0505-00)
Pre-procedure1
- Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
- Read the pending DTCs.
Powertrain > Engine > Trouble Codes
Result
Result Proceed to DTCs are not output A P0505-00 is output B
Post-procedure1
- None
Result:
A
END
Result:
B
REPLACE ECM. Refer to REMOVAL [12/2021 - ]