Rear Differential Carrier Assembly (For LSD)

REAR DIFFERENTIAL CARRIER ASSEMBLY (FOR LSD)

Rear differential carrier oil seal installation depth		-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)
Rear drive shaft oil seal installation depth		-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)
Differential ring gear runout		0.05 mm (0.00197 in.)
Differential ring gear backlash		0.08 to 0.13 mm (0.00315 to 0.00511 in.)
Differential drive pinion runout		0.08 mm (0.00315 in.)
Differential drive pinion preload (Starting torque)		1.25 to 1.65 Nm (13 to 16 kgfcm, 12 to 14 in.*lbf)
Total preload (Starting torque)		New bearing: 1.91 to 3.51 Nm (20 to 35 kgfcm, 17 to 31 in.lbf) Reused bearing: 1.74 to 2.96 Nm (18 to 30 kgfcm, 16 to 26 in.lbf)
Rear differential side gear shaft snap ring thickness	66	3.6475 to 3.6725 mm (0.14360 to 0.14459 in.)
	68	3.6675 to 3.6925 mm (0.14439 to 0.14537 in.)
	70	3.6875 to 3.7125 mm (0.14518 to 0.14616 in.)
	72	3.7075 to 3.7325 mm (0.14596 to 0.14695 in.)
	74	3.7275 to 3.7525 mm (0.14675 to 0.14774 in.)
	76	3.7475 to 3.7725 mm (0.14754 to 0.14852 in.)
	78	3.7675 to 3.7925 mm (0.14833 to 0.14931 in.)
	80	3.7875 to 3.8125 mm (0.14911 to 0.15010 in.)
	82	3.8075 to 3.8325 mm (0.14990 to 0.15089 in.)
	84	3.8275 to 3.8525 mm (0.15069 to 0.15167 in.)
	86	3.8475 to 3.8725 mm (0.15148 to 0.15246 in.)
	88	3.8675 to 3.8925 mm (0.15226 to 0.15325 in.)
	90	3.8875 to 3.9125 mm (0.15305 to 0.15404 in.)
	92	3.9075 to 3.9325 mm (0.15384 to 0.15482 in.)
	94	3.9275 to 3.9525 mm (0.15463 to 0.15561 in.)
	96	3.9475 to 3.9725 mm (0.15541 to 0.15640 in.)
	98	3.9675 to 3.9925 mm (0.15620 to 0.15718 in.)
	00	3.9875 to 4.0125 mm (0.15699 to 0.15797 in.)
	02	4.0075 to 4.0325 mm (0.15778 to 0.15876 in.)
	04	4.0275 to 4.0525 mm (0.15856 to 0.15955 in.)
	06	4.0475 to 4.0725 mm (0.15935 to 0.16033 in.)
	08	4.0675 to 4.0925 mm (0.16014 to 0.16112 in.)
	10	4.0875 to 4.1125 mm (0.16092 to 0.16191 in.)
	12	4.1075 to 4.1325 mm (0.16171 to 0.16270 in.)
	14	4.1275 to 4.1525 mm (0.16250 to 0.16348 in.)
	16	4.1475 to 4.1725 mm (0.16329 to 0.16427 in.)
	18	4.1675 to 4.1925 mm (0.16407 to 0.16506 in.)
	20	4.1875 to 4.2125 mm (0.16486 to 0.16585 in.)
	22	4.2075 to 4.2325 mm (0.16565 to 0.16663 in.)
	24	4.2275 to 4.2525 mm (0.16644 to 0.16742 in.)
	26	4.2475 to 4.2725 mm (0.16722 to 0.16821 in.)
	28	4.2675 to 4.2925 mm (0.16801 to 0.16900 in.)
	30	4.2875 to 4.3125 mm (0.16880 to 0.16978 in.)
	32	4.3075 to 4.3325 mm (0.16959 to 0.17057 in.)
	34	4.3275 to 4.3525 mm (0.17037 to 0.17136 in.)
	36	4.3475 to 4.3725 mm (0.17116 to 0.17215 in.)
	38	4.3675 to 4.3925 mm (0.17195 to 0.17293 in.)
	40	4.3875 to 4.4125 mm (0.17274 to 0.17372 in.)
	42	4.4075 to 4.4325 mm (0.17352 to 0.17451 in.)
Rear differential drive pinion plate washer thickness	88	1.87 to 1.89 mm (0.0737 to 0.0744 in.)
	90	1.89 to 1.91 mm (0.0745 to 0.0752 in.)
	92	1.91 to 1.93 mm (0.0752 to 0.0759 in.)
	94	1.93 to 1.95 mm (0.0760 to 0.0767 in.)
	96	1.95 to 1.97 mm (0.0768 to 0.0775 in.)
	98	1.97 to 1.99 mm (0.0776 to 0.0783 in.)
	00	1.99 to 2.01 mm (0.0784 to 0.0791 in.)
	02	2.01 to 2.03 mm (0.0792 to 0.0799 in.)
	04	2.03 to 2.05 mm (0.0800 to 0.0807 in.)
	06	2.05 to 2.07 mm (0.0808 to 0.0815 in.)
	08	2.07 to 2.09 mm (0.0815 to 0.0822 in.)
	10	2.09 to 2.11 mm (0.0823 to 0.0830 in.)
	12	2.11 to 2.13 mm (0.0831 to 0.0838 in.)
	14	2.13 to 2.15 mm (0.0839 to 0.0846 in.)
	16	2.15 to 2.17 mm (0.0847 to 0.0854 in.)
	18	2.17 to 2.19 mm (0.0855 to 0.0862 in.)
	20	2.19 to 2.21 mm (0.0863 to 0.0870 in.)
	22	2.21 to 2.23 mm (0.0871 to 0.0878 in.)
	24	2.23 to 2.25 mm (0.0878 to 0.0885 in.)
	26	2.25 to 2.27 mm (0.0886 to 0.0893 in.)
	28	2.27 to 2.29 mm (0.0894 to 0.0901 in.)