Inspection [09/2014 - 11/2017]: Procedure
WARNING: This page is about a different car, the 2017 Lexus RC F, 2016 Lexus RC F, and 2015 Lexus RC F. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT PRE-COLLISION SYSTEM CANCEL SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Pre-collision System Cancel Switch Assembly)Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 Pressed Below 50 Ω 1 - 2 Not pressed 1 MΩ or higher If the result is not as specified, replace the pre-collision system cancel switch assembly.
- Measure the resistance according to the value(s) in the table below.