Customize Parameters [10/2018 - ]
- CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
HINT:
The following items can be customized.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Smart Key / Access or Seat.
- Select the setting by referring to the table below.
Smart Key / Access
Tester Display Description Default Setting ECU Seat position/Tilt & Telesco memory recall setting This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system". D Door 0:D Door, 1:Any Door Main body ECU (Multiplex network body ECU) Seat
Tester Display Description Default Setting ECU Auto Operation Interference Avoidance Function Setting for availability of auto adjustment function that avoids interference between headrest and roof headlining during driver seat operation. ON 0:ON, 1:OFF Position control ECU assembly Seat Move Distance Setting of seat slide distance for power easy access system. Standard 00:OFF, 01:Little, 10:Standard Main body ECU (Multiplex network body ECU)
- Customizing with the multi-display
- Turn the ignition switch to ON.
- Enter the following menus:
- MENU / Setup / Vehicle / Vehicle customization / Other Vehicle Settings.
- Select the setting by referring to the table below.
Display Description Default Setting Relevant ECU Driver's seat Easy-Exit Slide Allows customizing of the seat movement distance for the power seat power easy access system. Full Off / Partial / Full Main body ECU (Multiplex network body ECU)