Freeze Frame Data [12/2017 - 10/2023]
Body Electrical > Sub Battery Module
| Tester Display | Measurement Item | Range |
|---|---|---|
| VL01 Voltage | This parameter indicates the voltage value of VL01 | 0 to 37.203 V |
| VL02 Voltage | This parameter indicates the voltage value of VL02 | 0 to 18.906 V |
| VL03 Voltage | This parameter indicates the voltage value of VL03 | -3.486 to 7.093 V |
| CNT V1 Voltage | This parameter indicates the voltage value of CNT V1 | 0 to 37.203 V |
| CNT V2 Voltage | This parameter indicates the voltage value of CNT V2 | 0 to 37.203 V |
| Sub Battery Module Charge Control Current | Sub-battery module charge control current | 0 to 240.88 A |
| Sub Battery Module Discharge Control Current | Sub-battery module discharge control current | 0 to 240.88 A |
| Protection Relay FET Temperature1 | This parameter indicates the temperature of the protection relay FET1. | -50 to 120°C (-58 to 248°F) |
| Protection Relay FET Temperature2 | This parameter indicates the temperature of the protection relay FET2. | -50 to 120°C (-58 to 248°F) |
| Sub Battery Module Temperature | This parameter indicates the temperature of the sub battery. | -50 to 120°C (-58 to 248°F) |
| Auxiliary Battery Voltage | Sub-battery module assembly B (+B) terminal voltage | 0 to 65.535 V |
| Protection Relay Circuit Voltage | This parameter indicates the voltage of protection relay circuit. | 0 to 81.081 V |
| Sub Battery Module State of Charge | This parameter indicates the capacity of the sub-battery | 0 to 100% |
| Sub Battery Module State of Health | This parameter indicates the battery deterioration rate of the sub-battery module. | 0 to 100% |
| Sub Battery Module Internal Resistance | This parameter indicates the internal resistance value of the sub-battery. | 0 to 1.27 Ohm |
| BRin Duty | This parameter indicates BRin input duty value. | 0 to 100% |
| BURDIAG1 Duty | This parameter indicates BURDIAG1 input duty value. | 0 to 100% |
| BURDIAG2 Duty | This parameter indicates BURDIAG2 input duty value. | 0 to 100% |
| RO out Duty | This parameter indicates RO out output duty value. | 0 to 100% |
| BUR Duty | This parameter indicates BUR output duty value. | 0 to 100% |
| Ignition Switch Status | This parameter indicates the status of the engine switch | ON/OFF |
| Hybrid Powertrain Control Module | This parameter indicates the availability of Hybrid system. | Without/With |
| Stop and Start Control Module | This parameter indicates the availability of Stop and Start. | Without/With |
| Power Switch Status | This parameter indicates the status of the power switch. | ON/OFF |
| Engine Status | This parameter indicates the status of the engine. | ON/OFF |
| Charging Control Mode | Charging control mode | SOC Keep / Auxiliary Charge / Refresh Charge / Normal / High/Low Temperature / Abnormal / SOC Calculate / Normal |
| Voltage Change Status | This parameter indicates the status of the voltage change. | ON/OFF |
| Backup Relay Status | This parameter indicates the status of the backup relay. | ON/OFF |
| Protection Relay Status | This parameter indicates the status of the protection relay. | ON/OFF |
| Vehicle Speed | This parameter indicates the speed of the vehicle. | 0 to 65535 km/h (0 to 40722 mph) |
| DTC Sub Code | This parameter indicates DTC sub code. | 0 to 255 |