Monitor Description
While the engine is being cranked, positive battery voltage is applied to terminal STA of the ECM. If the starter signal (STA) is not detected by the ECM when the engine is started, it determines that there is a malfunction in the STA circuit. The ECM then illuminates the MIL and stores the DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|
| P0615-14 | Starter Relay Circuit Short to Ground or Open | All of the following conditions are met (2 trip detection logic):
|
|
Comes on | Engine | A | SAE: P0616 |