Installation [11/2017 - ]: Procedure

1. Engage the 2 claws and 2 pins to install the steering pad switch assembly to the steering wheel sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Install the 2 screws.

   Torque: 2.4 N.m (24 kgf/cm, 21 in.lbf) 

3. Connect the connector to the spiral cable with sensor sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

4. Pass the wire harness over the 2 guides of the steering shake damper.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 1

Refer to INSTALLATION [09/2014 - ]