DTC B2313: Glass Position Initialization Incomplete [01/2017 - ]: Procedure

1. Turn the power switch on (IG).
2. Initialize the power window regulator motor assembly.

   Refer to INITIALIZATION [01/2017 - ]

   HINT: 

   Initialize the power window regulator motor assembly that has DTC B2313 stored in its ECU.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Check for DTCs.

   Refer to DTC CHECK / CLEAR [01/2017 - ]

   Body Electrical > D-Door Motor > Trouble Codes 

   Body Electrical > P-Door Motor > Trouble Codes 

   HINT: 

   Check for DTCs for the power window regulator motor assembly that has DTC B2313 stored in its ECU.

   OK

   DTC B2313 is not output.

   Result

   Result	Proceed to
   OK	A
   NG (D-Door Motor)	B
   NG (P-Door Motor)	C

Result: 

A 

END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED) 

Result: 

B 

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY LH. Refer to  REMOVAL [01/2017 - 05/2023]  , or refer to  REMOVAL [05/2023 - ] 

Result: 

C 

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY RH. Refer to  REMOVAL [01/2017 - 05/2023]  , or refer to  REMOVAL [05/2023 - ]