October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal [01/2017 - ]: Procedure
- REMOVE FENDER APRON BRACE SUB-ASSEMBLY RH
Refer to PROCEDURE - Step 13 [01/2017 - 05/2023]
, or refer to PROCEDURE - Step 13 [05/2023 - ]
- REMOVE INVERTER MOTOR CABLE BRACKET ASSEMBLY
Refer to PROCEDURE - Step 12 [01/2017 - 05/2023]
, or refer to PROCEDURE - Step 12 [05/2023 - ]
- REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
- Disconnect the air fuel ratio sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the 3 wire harness clamps.
- Using SST, remove the air fuel ratio sensor from the exhaust manifold assembly RH.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
- Disconnect the air fuel ratio sensor connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Detach the 4 wire harness clamps.
- Using SST, remove the air fuel ratio sensor from the exhaust manifold assembly LH.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE EXHAUST MANIFOLD ASSEMBLY RH
Refer to REMOVAL [01/2017 - ]
- REMOVE EXHAUST MANIFOLD ASSEMBLY LH
Refer to REMOVAL [01/2017 - ]
- REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 2)
- Using SST, remove the air fuel ratio sensor from the exhaust manifold assembly RH.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 2)
- Using SST, remove the air fuel ratio sensor from the exhaust manifold assembly LH.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|