System Description [10/2017 - 10/2022]
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Lexus LS 500h, 2022 Lexus LS 500h, 2021 Lexus LS 500h, 2020 Lexus LS 500h, and 2019 Lexus LS 500h. However, it is still accessible from the selected car via links, so may be relevant.
- LIN COMMUNICATION SYSTEM DESCRIPTION
The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of a break in the communication lines or some other reason, the master control ECU of the relevant system stores DTCs. Refer to the table below about the communication bus lines and connected components.
HINT:
- Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.
- In the following table, "◦" indicates that the function applies, and "-" indicates that it does not.
DOOR BUS LINESComponent Master Control LIN Communication DTC Output Function Main body ECU (multiplex network body ECU) ◦ ◦ Multiplex network master switch assembly - - Front power window regulator motor assembly LH - - Front power window regulator motor assembly RH - - Rear power window regulator motor assembly LH - - Rear power window regulator motor assembly RH - - Sliding roof drive gear sub-assembly - - Kick door control sensor*1 - - Rear side window curtain assembly LH*2 - - Rear side window curtain assembly RH*2 - - *1: w/ Hands Free Power Back Door
*2: w/ Side Window Curtain
CERTIFICATION BUS LINESComponent Master Control LIN Communication DTC Output Function Certification ECU (smart key ECU assembly) ◦ ◦ Steering lock actuator with ECU assembly - - ID code box (immobiliser code ECU) - -