DTC B2313: Glass Position Initialization Incomplete [12/2021 - ]: Procedure

1. Turn the ignition switch to ON.
2. Initialize the power window regulator motor assembly.

   Refer to INITIALIZATION [12/2021 - ]

   HINT: 

   Initialize the power window regulator motor assembly that has DTC B2313 stored in its ECU.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Check for DTCs.

   Body Electrical > D-Door Motor > Trouble Codes 

   Body Electrical > P-Door Motor > Trouble Codes 

   Body Electrical > RL-Door Motor > Trouble Codes 

   Body Electrical > RR-Door Motor > Trouble Codes 

   HINT: 

   Check for DTCs for the power window regulator motor assembly that has DTC B2313 stored in its ECU.

   Result

   Result	Proceed to
   Any D-Door Motor DTCs in the table below are output	A
   Any P-Door Motor DTCs in the table below are output	B
   Any RL-Door Motor DTCs in the table below are output	C
   Any RR-Door Motor DTCs in the table below are output	D
   No DTCs in the table below are output	E

   Malfunction Status	System	Related DTCs
   Glass Position Initialization Incomplete	D-Door Motor	B2313	Glass Position Initialization Incomplete
   	P-Door Motor	B2313	Glass Position Initialization Incomplete
   	RL-Door Motor	B2313	Glass Position Initialization Incomplete
   	RR-Door Motor	B2313	Glass Position Initialization Incomplete

Result: 

A 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH. Refer to  REMOVAL [12/2021 - ] 

Result: 

B 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH. Refer to  REMOVAL [12/2021 - ] 

Result: 

C 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH. Refer to  REMOVAL [12/2021 - ] 

Result: 

D 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH. Refer to  REMOVAL [12/2021 - ] 

Result: 

E 

END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED)