Disassembly [11/2021 - ]: Procedure

REMOVE STEERING LOCK ACTUATOR WITH ECU ASSEMBLY (w/ Steering Lock Actuator Assembly)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Secure the steering column assembly in a vise between aluminum plates.
NOTE:
Do not overtighten the vise.
Using SST, strike a punch mark for drilling in the center of the steering lock set bolt.
- SST: 09622-00010
NOTE:
When striking the punch mark, in order to prevent impact force from being applied to the steering lock actuator assembly, do not use a normal center punch.
Using a drill, drill a hole in the 2 steering lock set bolts and insert a screw extractor.
Using the screw extractor, remove the 2 steering lock set bolts and steering lock actuator with ECU assembly.
NOTE:
Do not use a tool or equivalent to push in the screw extractor. Push in the screw extractor by hand.

REMOVE MULTIPLEX TILT AND TELESCOPIC ECU