DTC P0606-09: Control Module Processor (Brake Override System Output Signal) Component Failure [09/2023 - ]: Procedure
- READ OUTPUT DTC
Pre-procedure1
- Perform a confirmation drive. (Refer to confirmation drive in function description)
- Read the DTCs.
Powertrain > Engine > Trouble Codes
Result
Result Proceed to P0606-09 and other DTCs are output A P0606-09 is output B HINT:
If a DTC other than DTC P0606-09 is output, troubleshoot that DTC first.
Post-procedure1
- None.
Result:
B
REPLACE ECM. Refer to REMOVAL [09/2023 - ]
Result:
A
See step 2
- GO TO DTC CHART
HINT:
After the inspection, perform the following procedure.
Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2023 - ]
Result
Proceed to NEXT Result:
NEXT
See step 3
- CLEAR DTC
Pre-procedure1
- None.
Post-procedure1
- Turn the ignition switch off and wait for at least 30 seconds.
Result:
NEXT
See step 4
- CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
Pre-procedure1
- Perform a confirmation drive. (Refer to confirmation drive in function description)
- Read the DTCs.
Powertrain > Engine > Trouble Codes
Result
Result Proceed to DTCs are not output A P0606-09 is output B
Post-procedure1
- None.
Result:
A
END
Result:
B
REPLACE ECM. Refer to REMOVAL [09/2023 - ]