LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2025 >> NX 350 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Engine Coolant Temperature Sensor >> Removal [11/2021 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [11/2021 - ]: Procedure

  1. DRAIN ENGINE COOLANT 

    Refer to REPLACEMENT [11/2021 - ]

  2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR (for Outlet Side) 
    NOTE:

    If the engine coolant temperature sensor has been struck or dropped, replace it.
    1. GTY1076268Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE GENERATOR ASSEMBLY 

    HINT: 

    Perform this procedure only when replacement of the engine coolant temperature sensor (for Water Inlet Housing Side) is necessary.

    Refer to REMOVAL [11/2021 - ]

  4. DISCONNECT WIRE HARNESS 

    HINT: 

    Perform this procedure only when replacement of the engine coolant temperature sensor (for Water Inlet Housing Side) is necessary.

    1. GTY1077400Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. DISCONNECT NO. 2 INTERCOOLER COOLING WATER PIPE 

    HINT: 

    Perform this procedure only when replacement of the engine coolant temperature sensor (for Water Inlet Housing Side) is necessary.

    1. GTY1076276Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. DISCONNECT NO. 1 INTERCOOLER COOLING WATER PIPE 

    HINT: 

    Perform this procedure only when replacement of the engine coolant temperature sensor (for Water Inlet Housing Side) is necessary.

    1. GTY1076274Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE ENGINE COOLANT TEMPERATURE SENSOR (for Water Inlet Housing Side) 
    NOTE:

    If the engine coolant temperature sensor has been struck or dropped, replace it.
    1. GTY1076275Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE INTAKE MANIFOLD WITH INTERCOOLER ASSEMBLY 

    HINT: 

    Perform this procedure only when replacement of the engine coolant temperature sensor (for Cylinder Head Side) is necessary.

    Refer to REMOVAL [11/2021 - ]

  9. REMOVE ENGINE COOLANT TEMPERATURE SENSOR (for Cylinder Head Side) 
    1. GTY1076474Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the engine coolant temperature sensor connector.
      2. Using SST, remove the engine coolant temperature sensor from the cylinder head sub-assembly.
        • SST: 09817-33191 
        NOTE:

        If the engine coolant temperature sensor has been struck or dropped, replace it.

      3. Remove the gasket from the engine coolant temperature sensor.
scientia non olet · About LEMON Manuals