Removal [10/2022 - 08/2023]: Procedure
- DRAIN ENGINE COOLANT (for Engine)
Refer to REPLACEMENT [10/2022 - 08/2023]
- REMOVE COOL AIR INTAKE DUCT SEAL
Refer to PROCEDURE - Step 1
- REMOVE INLET AIR CLEANER ASSEMBLY
See step 4
- REMOVE NO. 2 ENGINE COOLANT TEMPERATURE SENSOR NOTE:
If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it.
- REMOVE HYBRID MOTOR CONTROL INVERTER ASSEMBLY
Refer to REMOVAL [10/2022 - ]
- REMOVE ENGINE COOLANT TEMPERATURE SENSOR NOTE:
If the engine coolant temperature sensor has been struck or dropped, replace it.