April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [10/2022 - 08/2023]: Procedure

INSTALL SPARK PLUG

Refer to PROCEDURE - Step 1

INSTALL IGNITION COIL ASSEMBLY

GTY1077167

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using an 8 mm socket wrench, install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.
Torque: 7.5 N.m (76 kgf/cm, 66 in.lbf)

NOTE:
If an ignition coil assembly has been struck or dropped, replace it.
Connect the 4 ignition coil assembly connectors.

INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Refer to PROCEDURE - Step 46
PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.
  Refer to INITIALIZATION [10/2022 - ]