LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 1990 >> Continental Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Torque Specifications
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Front Lower Control Arm Inner Pivot-To-Subframe Adjusting Nut 96-110 (130-150)
Rear Adjusting Cam Attaching Nut
Sedan 45-65 (61-88)
Wagon 40-55 (54-74)
Rear Control Arm Adjusting Rod Lock Nut 41-59 (55-80)
Rear Lower Control Arm Inner Pivot-To-Frame Bracket Adjusting Nut 70 (230)
Rear Tie Rod Adjusting Nut "B" 35-50 (47-68)
Strut Mount-to-Strut Tower Attaching Nut 20-30 (27-40)
Subframe-to-Body Bolt 55-75 (75-102)
Tie Rod End Adjusting Sleeve Clamp Bolt 20-22 (27-30)
Tie Rod End Lock Nut 35-50 (48-68)
Tie Rod End-to-Steering Knuckle (1) 35-47 (48-63)
Upper Control Arm Inner Pivot-to-Frame Adjusting Bolt 98 (130)
Upper Control Arm Inner Shaft-to-Frame Bolt 100-140 (136-190)
Wheel Lug Nut 80-105 (108-142)
INCH Lbs. (N.m) 
Rear Tie Rod Adjusting Nut "A" 72-144 (8-16)
(1) Tighten to specification, then continue until cotter pin slots are aligned with hole. Install new cotter pin.