Side Mirror Motor Test
Remove door trim panel. Disconnect mirror motor connector from mirror switch harness. Using 2 jumper wires, connect battery voltage and chassis ground to specified wire terminals. Refer to the SIDE MIRROR MOTOR TEST table below. Observe mirror for proper movement. If mirror motor fails any portion of test, replace mirror assembly.
SIDE MIRROR MOTOR TEST
| Mirror Movement | Battery Voltage | Ground | |
|---|---|---|---|
| Left Mirror | |||
| Up | Dark Blue | Yellow/Light Blue | |
| Down | Yellow/Light Blue | Dark Blue | |
| Left | Red | Yellow/Red | |
| Right | Yellow/Red | Red | |
| Right Mirror | |||
| Up | Purple | White/Purple | |
| Down | White/Purple | Purple | |
| Left | Dark Green | White/Light Green | |
| Right | White/Light Green | Dark Green | |