Driver Seat Module (DSM)

REMOVAL
1. Remove the driver seat; refer to Seats.







2. Release the driver seat module bracket from the seat track.
1 Release the four retainers.
2 Release the module bracket.







3. Remove the Driver Seat Module (DSM).
1 Disconnect the electrical connectors.
2 Remove the screws.
3 Remove the DSM.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE:
^ Once the new module is installed, it is necessary to calibrate the seat. For additional information, refer to Seats.
^ It is important to make sure that the locking tabs are in the correct locations.