Torque Converter Flushing
WARNING: This page is about a different car, the 2003 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
- Following the instructions included with a suitable torque converter/transmission fluid cooler cleaner, flush the torque converter.
- After flushing, drain the remainder of the solvent through the converter drain plug.
- Add 1.9 liter (2 qt.) of clean automatic transmission fluid into the converter fluid filler tube and agitate by hand.
- Thoroughly drain the solution.
CAUTION:
Mineral spirits used to clean the torque converter must be fresh, non-chlorinated and non-halogenated.