Reverse Servo Assembly: Disassembly

Remove the control valve spring retainer.

Fig 1: Identifying Control Valve Spring Retainer
Remove the reverse servo spring and check valve.

Fig 2: Identifying Reverse Servo Spring & Check Valve

NOTE: Tabs on servo plate mate with slots on cover every 120 degrees.

Fig 3: Identifying Servo Plate

Remove the reverse servo plate by turning in either direction to release.
- Align arrow on servo plate with any slot on cover.
Remove the reverse servo spring.

Fig 4: Identifying Reverse Servo Spring
Remove the reverse servo piston and seal assembly.
- Inspect the seal for damage, install new reverse servo piston if necessary.
Fig 5: Identifying Reverse Servo Piston
Inspect and install a new reverse servo piston seal if damaged.

Fig 6: Identifying Reverse Servo Piston Seal