Brake Signal: Service and Repair

REMOVAL
1. Remove the instrument panel insulator.
^ Disconnect electrical connector.







2. Remove the Brake Pedal Position (BPP) switch.
1 Disconnect the electrical connector.
2 Remove the BPP switch.

INSTALLATION

CAUTION: Initial installation of a brake pedal position (BPP) switch allows for one adjustment. If additional adjustments are required, install a new switch.







1. Rotate the lock knob counterclockwise to the stop to unlock.
2. With the engine running, fully depress and hold the brake pedal.







3. Install the BPP switch.
1 Position the BPP switch in the bracket and rotate counterclockwise.
2 Connect the electrical connector.
4. Slowly release the brake pedal.