Keypad - Keyless Entry: Removal

WARNING: This page is about a different car, the 2002 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery ground cable. Refer to BATTERY, MOUNTING AND CABLES .
Remove the driver door panel. For additional information; refer to INTERIOR TRIM AND ORNAMENTATION .
Position the weather shield aside.
Remove the keyless entry keypad.
1. Remove the clip and remove the keyless entry keypad.
  - Disconnect the electrical connector.
    
    Fig 1: Removing Keyless Entry Keypad
    Courtesy of FORD MOTOR CO.