Fuel Line Fittings - Push Connect: Disconnect

WARNING: This page is about a different car, the 2003 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related component. Highly flammable mixtures are always present and may be ignited, resulting in possible personal injury.

WARNING: Fuel in the fuel system remains under high pressure even when the, engine is not running. Before servicing or disconnecting any of the fuel lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal injury or a fire hazard.

Relieve the fuel pressure. For additional information, see FUEL SYSTEM PRESSURE RELEASE .
Disconnect the safety clip from the male hose.

Fig 1: Disconnecting Safety Clip
Courtesy of FORD MOTOR CO.
Install the Disconnect Tool and push into the fitting.

Fig 2: Installing Disconnect Tool
Courtesy of FORD MOTOR CO.
Separate the fittings.
- Inspect for damage.
- Clean the fittings.
Fig 3: Separating Fitting
Courtesy of FORD MOTOR CO.