Lumbar Control Switch: Installation

Install the power lumbar switch until seated into bezel.

Fig 1: Installing Power Lumbar Switch
Courtesy of FORD MOTOR CO.
Connect the power lumbar switch electrical connector.

Fig 2: Connecting Power Lumbar Switch Electrical Connector
Courtesy of FORD MOTOR CO.
Position the seat cushion trim cover back and fasten the J-clips.

Fig 3: Fastening J-Clips
Courtesy of FORD MOTOR CO.
Install the affected seat. For additional information, refer to FRONT SEAT .
Repower the SRS. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING .