July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Bench Mode Procedure for SSA, SSB, SSC, SSD and TCC

Follow operating instructions from the scan tool menu screen:

Select "Output State Control."
Select "Trans - Bench Mode."
Select "PIDs" to be monitored.
Monitor all selected PIDs during test.
Select "Parameters - SSA, SSB, SSC, SSD or TCC."
Select "ON" to turn solenoid ON.
Press "SEND" to send command ON.
Select "OFF" to turn solenoid OFF.
Press "SEND" to send command OFF.
Select "XXX" to cancel at any time.
Press "SEND."